PL200 KIT
| NO | Title | Updated | Download | |
| 1 | What's the maximum transmission distance about the PLC？ | 2018-11-02 |
|
|
No matter how far it is, PLCs can connect to each one only if they are in the same loop of circuit. |
||||
| 2 | How many PLCs can TOTOLINK PLC pair with synchronously | 2018-11-02 |
|
|
Maximum 8 PLCs are allowed to pair with synchronously. |
||||
| 3 | How to creating a new HomePlug AV network？ | 2018-11-02 |
|
|
Application introduction: You can connect a number of devices on a powerline network, but you can only use the pair button on two devices at a time. We suppose that the Powerline adapter that connected with the Router is adapter A, and that connected with the computer is adapter B. Please follow the below steps to create a secured Powerline network using the pair button: STEP-1: Press the pair button of Powerline adapter A for about 3 seconds, the Power LED will start flashing. STEP-2: Press the pair button of Powerline adapter B for about 3 seconds, the Power LED will start flashing. Note:This must be done within 2 seconds after pressing the pair button of powerline adapter A. STEP-3: Wait for about 3 seconds while your Powerline adapter A and B are connecting. The Power LED on both adapters will stop flashing and become solid light when the connection is made. |
||||
| 4 | How to Reset the Powerline Adapter to Factory Default？ | 2018-11-02 |
|
|
Press and hold Sec/Rst button for about 10 seconds, the device will reset to factory settings and reboot again. |
||||
